Technologies
- Displays and Panel PCs
- Embedded Computing & Networking
- Freq Oscillators and Clock
- Power and Heat Dissipation
- Software Solutions
- Storage Solutions
- Test & Measurement
- Wireless Solutions
Bluetooth
 |
 |
Request further information here.
CSR8000™
The CSR8000 improves voice quality with wireless connected devices and includes emerging Bluetooth low energy devices. CSR8000 products all feature a DSP so customers can include audio enhancements.
Key Features
- Classic Bluetooth
- Bluetooth High Speed v3.0
- Bluetooth low energy v4.0
- FM
- Wideband Speech ready
- Includes audio enhancements such as CVC and apt-X
CSR µEnergy™
A single-mode Bluetooth low energy solution enabling ultra low power connectivity and basic data transfer for a new market of tiny, cost-effective and power-efficient consumer products.
Key Features
- Bluetooth v4.0 (Single mode Low Energy)
- +8dBm Bluetooth LE maximum Tx output power
- -92dBm Bluetooth LE Rx sensitivity
- Support for LE host stack including ATT, GATT, SMP, L2CAP, GAP
- RSSI monitoring for proximity applications
- <600nA current consumption in dormant mode
- QFN 32 lead, 5 x 5 x 0.6mm - CSR1000
- QFN 56 lead, 8 x 8 x 0.9mm - CSR1001
CSR7810™
A unique, single-chip voice processing and Bluetooth solution designed to address OEM’s need for noise reduction in their products.
Key Features
- Voice processing modes: dual-mic, single-mic and loudspeaker
- CVC 2-mic noise suppression
- Can be used as part of a fully compliant Bluetooth v3.0 + HS system
- Low-power 1.5V operation, 1.8 to 3.6V I/O
- Green (RoHS and no antimony or halogenated flame retardants)
A DSP ROM solution supporting both single and dual-microphone CVC noise reduction aimed at the increasing number of mid-range Bluetooth headsets.
Key Features
- Single-chip 2-mic Bluetooth mono headset solution supporting audio prompts, multipoint and proximity pairing
- Built-in high-performance fifth generation CVC single and dual microphone echo and noise cancellation
- Low-power consumption: over 7 hours of talk time from a 120mAh battery
- Advanced Multipoint support: enables a headset (HFP) connection to 2 phones for voice
- Packet loss and bit error concealment to improve audio quality in the presence of air interference
- Very low eBOM for a DSP based 2-mic noise reduction headset.
- Green (RoHS compliant and no antimony or halogenated flame retardants)
A Bluetooth chip for low-cost, low-end mono headsets, which includes support for CVC 5.0 noise reduction, and packet and bit error concealment, to restore audio quality in difficult RF environments.
Key Features
- Fully qualified single-chip Bluetooth v3.0 system
- Single-chip mono headset solution with advanced echo and noise cancellation
- Packet loss and bit error concealment which restores audio quality in difficult RF environments
- Low power consumption: over 13 hours talk time from a 120mAh battery
- High-performance CVC 1-mic echo and noise cancellation with selectable low power wind noise reduction feature
- Support for boost charge proving up to 240mA total charge current
- Green (RoHS compliant and no antimony or halogenated flame retardants)
CSR’s low-end, low-cost mono headset Bluetooth solution, which incorporates HFP Multipoint to allow multiple simultaneous connections between a Bluetooth headset and two devices.
Key Features
- High-quality, ultra low power, mono headset solution with extremely low-cost eBOM
- Class leading RF performance for high quality audio link and superior end user experience
- Longest talk time: up to 18 hours from a small 120mAh battery
- Pin compatible with BC6140
- Green (RoHS compliant and no antimony or halogenated flame retardants)
An innovative and flexible connectivity product combining CSR’s industry-leading Bluetooth v3.0 and Wi-Fi technology, with added support for FM and GPS.
Key Features
- Industry’s smallest Bluetooth, FM, and Wi-Fi multi-radio product
- FM radio receiver with world’s best audio quality for handsets
- Low-power FM radio transmitter to play audio through existing receivers transmit and receive
- Low-cost eGPS option available plus high-performance SiRFstarIV products
- Superior Wi-Fi throughput and hardware WAPI support
A highly-integrated embedded wireless solution, combining Bluetooth and FM Rx/TX.
Key Features
- Bluetooth v2.1 + EDR radio delivering +10dBm output and -93dBm sensitivity
- AuriStream voice CODEC providing fixed line call quality to a Bluetooth headset or reduced power consumption
- An FM radio receive with speaker drivers for direct headphone connection and short-range transmitter with audio streaming of MP3 and RDS support for track names.
- BC7820 can be used as part of a fully compliant Bluetooth v3.0+HS system
The world’s smallest GPS combination device, which also integrates Bluetooth and FM Rx/Tx
Key Features
- Multi-band GNSS radio
- Fully qualified Bluetooth v2.1 + EDR system with on-chip balun
- BC7830 can be used as part of a fully compliant Bluetooth v3.0 + HS system
- Integrated FM radio receiver and transmitter with full RDS/RBDS encoding and decoding, including support for TMC encoding and decoding
- Both analogue and digital stereo audio input and output stages
- Integrated digital core and analogue regulators
- Green (RoHS and no antimony or halogenated flame retardants)
A ROM-based Bluetooth music solution optimized for stereo headset and wireless speaker products which features an integrated DSP.
Key Features
- Support for A2DP 1.2, AVRCP 1.0, HSP 1.0 and HFP 1.5 Bluetooth profiles including 3-way calling
- FastStream (low latency CODEC) for video and gaming applications
- SBC and MP3* decoding CVC echo and noise reduction algorithm
- Very low power consumption
- Superior audio quality
- High performance RF (receive sensitivity -90 dBm, transmit power +8dBm)
- Green (RoHS compliant and no antimony or halogenated flame retardants)
One of CSR’s landmark Bluetooth products, combining superb Bluetooth performance with particularly strong voice-applications features
Key Features
- Fully qualified Bluetooth v2.1 + EDR specification
- Piconet and scatternet support
- Minimum external components
- Low-power 1.5V operation, 1.8V to 3.6V I/O
- Integrated 1.5V regulator
- Integrated CODEC offering significant power reduction over the CVSD‑based system
- Support for 802.11 coexistence
- Green (RoHS and no antimony or halogenated flame retardants)
A Bluetooth chip, complete with onchip Kalimba DSP, stereo CODEC and flash, for integrating wireless multimedia functionality into embedded devices.
Key Features
- Can be used as part of a fully compliant Bluetooth v3.0 system
- A flexible single-chip Bluetooth solution for Bluetooth audio solutions
- Low-power 1.5V operation, 1.8V to 3.6V I/O
- Supports mono and stereo applications
- Supports DSP enhancements for music, voice, text-to-speech, speech recognition and CODECs
- Supports eXtension partner solutions
- Support for IEEE 802.11 coexistence
- Green (RoHS Compliant and no Antimony or Halogenated Flame Retardants)
Single chip Bluetooth v2.1 + EDR system suitable for PCs
Key Features
- Fully qualified Bluetooth® v2.1 + EDR specification
- Full-speed Bluetooth operation with Piconet and Scatternet support
- Ultra low power consumption
- Minimum external components required
- USB onterface
- 4Mbit internal ROM
- Support for 802.11 coexistence
- Green (RoHS and no Antimony or Halogenated Flame Retardants)
Implements the Enhanced Data Rate (EDR) Bluetooth specification for PCs
Key Features
- Enhanced Data Rate (EDR) compliant for both 2Mbps and 3Mbps modulation modes
- Single-chip solution integrating radio, baseband, microcontroller
- External Flash memory interface (8Mbits)
- Bluetooth v2.0+EDR system (v2.1 upgradeable)
- Full speed Bluetooth operation with full Piconet support
- Scatternet support
- Extended SCO (eSCO) support
- USB and dual UART ports
- Support for 802.11 coexistence
Bluegiga Bluetooth modules provide the highest level of integration that enable device manufacturers and OEMs to easily add wireless, secure and standard based connectivity into their applications.
WT21 ROM Module Bluetooth 2.1 + EDR module for applications where a host processor is capable of running the Bluetooth software stack.
WT12 Bluetooth® Module WT12 is Bluegiga's class 2, Bluetooth 2.1 + EDR module.
WT11 Bluetooth® Module WT11 is Bluegiga's class 1, Bluetooth 2.1 + EDR module.
iWRAP is Bluegiga's embedded Bluetooth stack for WT12, WT11, WT32 and WT41.
Bluetooth low energy is a new, open standard developed by the Bluetooth SIG. It's targeted to address the needs of new modern wireless applications such as ultra-low power consumption, fast connection times, reliability and security.
BLED112 Bluetooth low energy USB Dongle is a single mode USB device.
